INSTRUCTIONS FOR HANG MOUNTING THE XL DEVICE
The XL device is designed to be hang mounted (i.e. suspended from a pair of chains).
- Chain must have a working load limit of not less than 400 pounds (182 kilograms).
- Chain material must be appropriate for the environment; for example, type 304L stainless steel for severe environments.
- Chain must be attached to each of the two end plates of the XL device through the provided mounting holes, each measuring a nominal 0.5" (12.7 mm) in diameter.
Attachment to the support structure and attachment to the XL device must use attaching devices (e.g. shackles) with the same working load limit and material considerations as described above.
Attachment points to the support structure should be at the same spacing as the width of the XL device (i.e. the same spacing as between the XL device end plates).
WARNING: Make sure that the supporting chain and attaching devices meet the above specifications. Failure to follow this warning could result in damage to property, personal injury or death.